The Synthetic & Rayon Textiles Export Promotion Council

Roll out of Mobile X-ray Container Scanner (MXCS) installed at APMT and NSICT/DP World Terminals and working hours of MXCS at NSICT/DP World (Scan Mode-M2) and APMT (Scanned Mode-M3)

Circular No. ES/75/2021-22                                                                    25th  June, 2021  

 

To: Members of the Council             

 

Sub.: Roll out of Mobile X-ray Container Scanner (MXCS) installed at APMT and NSICT/DP World Terminals and working hours of MXCS at NSICT/DP World (Scan Mode-M2) and APMT (Scanned Mode-M3) 

 

Dear Member,     

 

JNCH has issued Public Notice No.58/2021 dated 23rd June, 2021 on the above subject. 

 

Kind attention is invited to Public Notice No. 31/2021 dated 30.03.2021 whereby the Mobile X-Ray Container Scanner (MXCS) installed at JNPCT Terminal/ Site of JNPT was successfully commissioned and rolled out.  

 

The other two MXCS installed at APMT and NSICT/ DP WORLD Terminals shall be rolled out for routine operation w.e.f. 25th June, 2021. Al the provisions/procedures as laid down in Public Notice No. 31/2021 and Standing Order No. 7/2021 dated 30.3.2021 will be relevant and applicable for the MXCS installed at APMT and NSICT/ DP WORLD Terminals. 

 

With regard to working hours of these Mobile Scanners, it is envisaged that- 

 

  1. MXCS located at NSICT/ DP WORLD site shall be operational 24*7. 

  2. MXCS located at APMT site shall be operational during daytime only between 9.00 am to 7.00 pm on all days. 

  3. After 7.00 pm, all the containers selected for scanning at MXCS (APMT) will invariably be diverted for scanning to DTCS without any endorsement from Customs.    

In case of any difficulty, members may kindly contact the Deputy Commissioner/ CSD, JNCH at csd.jnch@gov.in  

Members may kindly make a note of the above. 

 

Thanking you, 

Yours faithfully,  

S. BALARAJU  
EXECUTIVE DIRECTOR